silverscreen

833 ClearView

De nieuwe standaard voor uitzonderlijk visueel comfort
• Uniek in de markt – Reflectie van 74% op op gemetalliseerd polyester textiel
• Exceptioneel doorzicht: Onafhankelijk onderzoek door de ITA RWTH Aachen
Universiteit. Alle kleuren scoren het hoogst: Uitstekend doorzicht
• De zeer geavanceerde en precieze samenstelling van het textiel, in combinatie
met een relatief lage openheidsfactor van 3%, biedt een uitstekende balans
tussen het tegengaan van lichthinder met behoud van voortreffelijk doorzicht.
• Superieure prestaties zorgen voor uitstekend visueel en thermisch comfort.
• Milieuvriendelijk – Vrij van PVC, ftalaat, halogeen en formaldehyde
• Beschikbaar in een breedte tot 2.40 en binnenkort +/- 2.75 meter

Specification details
Specification details
Thickness (mm) 0.41
Weight (g/m²) 210
Width (cm) 275 (max.)
Composition Polyester
Standards
Flame retardant EN13501 B-s1, d0, DIN4102 B1, BS 5867 part 2 type B, NFPA 701
Environmental OEKO-TEX Standaard 100 Klasse IV, HPD2.1, RoHS2, REACH, GreenGuard (BREEAM), GreenGuard Gold, Formaldehyde vrij, Halogeen vrij, Ftalaat vrij, vrij van anti-microbiële stoffen, PVC vrij
Technical details
Technical details colour: White ED01
Solar reflection outside 74%
Light Transmission 4%
Openness Factor 3%
IR emissivity (metal side) 0.21
High Performance Glazing (reference glazing D EN14501) Colour: White ED01
Light transmission (LT) 3%
G-value / SHGC 15%
U-value W/m²K 0.8
Glare rating according to EN 14501 3
Applications
Applications
  • Roller Blind
  • Panel Tracks

Available in 6 colours

833_000
833_741
833_765
833_936
833_998
833_829

GLOSSARY OF TERMINOLOGY

SOLAR REFLECTION

The ratio or percentage of solar energy reflected by the shading. With Verosol fabric reflection on the aluminium side. Abbreviations: Rs, Rsol. The higher the number the better.

OPENNESS FACTOR

The percentage of open area (pores) to the total area of the shading fabric. These pores are necessary to enable view through. Abbreviation: OF. The higher the number the better viewthrough.

U-VALUE

Thermal heat loss (or gain) through a fenestration. The U-value reflects the energy flow through glass and shading when there is a temperature difference between outside and inside, and is the insulating property. Units are Btu/hr-ft²-°F or W/m².K The lower this U-value, the better the thermal heat insulation. The lower the number the better.

IR EMISSIVITY

The ability of a material surface to radiate (infrared) heat out. Metals in general and specifically aluminium have low IR emitting properties. IR emissivity of; glass is about 0.800, plastics is about 0.900 but a clean aluminium surface has an IR em of 0.15. Therefore metallised fabric has so called Low-E properties. The lower the number the better.

SOLAR FACTOR G-VALUE

Ratio between the total solar energy transmitted into a room through a window and the solar energy on the window. g-value is the solar factor of the combination of glazing and solar protection device. (EN14501). The lower the number the better.

LIGHT TRANSMISSION

The ratio or percentage of visible light passing through the shading. Abbreviations: Tv, Tvis. The lower the number the better.