 | Thickness (mm) | 0.55 |
 | Weight (g/m²) | 440 |
 | Width (cm) | 280 |
 | Composition | 75% PVC / 25% PET |
 | Flame retardant | NFPA 701, NFPA 92503 M2, BS 5867 Part 2 Type B |
 | Environmental | Phthalate free, Ökotex Standard 100, ISO 14001 and ISO 9001 |
 | Solar reflection outside | 73-74% |
 | Light transmission | 5-6% |
 | Openness Factor | 3-4% |
 | IR emissivity metal side (metal side) | 0.16 |
| | Light transmission | 5% |
 | G-value / SHGC | 27% |
 | U-value in (W/m²K) | 0.8 |
 | Glare control rating acc. to EN 14501 | 3 |
Roller Blinds
Panel Tracks
VerticalsOmniaScreen helps you to create natural shade, block sun glare, control indoor temperature, save a tremendous amount of energy on cooling, lighting and heating. Omnia scores even better on affordability than Verosol SilverScreen. So compared to other brands, even our second best is a winner.
Verosol OmniaScreen is created with the same innovative metallisation process as Verosol SilverScreen. It is versatile with an ultra-thin layer of aluminium, highly reflective (up to 74% solar reflection) and helps to control temperature effectively. With the beautiful transparency you block sun glare without blocking the view, give the inside of your building a more open and spacious appearance, enhancing the comfortable living and working atmosphere
The ratio or percentage of solar energy reflected by the shading. With Verosol fabric reflection on the aluminium side. Abbreviations: Rs, Rsol. The higher the number the better.
The percentage of open area (pores) to the total area of the shading fabric. These pores are necessary to enable view through. Abbreviation: OF. The higher the number the better viewthrough.
Thermal heat loss (or gain) through a fenestration. The U-value reflects the energy flow through glass and shading when there is a temperature difference between outside and inside, and is the insulating property. Units are Btu/hr-ft²-°F or W/m².K The lower this U-value, the better the thermal heat insulation. The lower the number the better.
The ability of a material surface to radiate (infrared) heat out. Metals in general and specifically aluminium have low IR emitting properties. IR emissivity of; glass is about 0.800, plastics is about 0.900 but a clean aluminium surface has an IR em of 0.15. Therefore metallised fabric has so called Low-E properties. The lower the number the better.
Ratio between the total solar energy transmitted into a room through a window and the solar energy on the window. g-value is the solar factor of the combination of glazing and solar protection device. (EN14501). The lower the number the better.
The ratio or percentage of visible light passing through the shading. Abbreviations: Tv, Tvis. The lower the number the better.
